Your cart
There are no more items in your cart
Transparent - PETG 1.75 - a thermoplastic polymer from the group of polyesters in the form of fiber, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before using. PET-G is a material friendly for beginners, material available in covering and transparent colors.
Physical properties of the product:
Diameter of filament: 1.75 mm / 2.85 mm
Dimensional tolerance of filament: +/- 0.05 mm
Roundness of filament: +/- 0.02 mm
Surface of the material: High Gloss
Shrinkage of the material: Very low
Product weight: 1.0 kg net, 1.36 kg gross
Spool - material: Transparent policarbonate
Weight of the empty spool: ~250 g
The diameter of the spool: 200 mm
Width of spool: ~70 mm
Diameter of mounting hole: 52 mm
Packaging: Printed cardboard
Package size: ~205x205x80 mm
Vacuum packing: Yes
Moisture absorber: Yes
Suggested printing parameters:
Hotend: 220-250°C
Heated bed: 70-80°C
Cooling the printout: Optional
Due to the structural differences of printers, the above figures should be considered as guidelines and the corresponding values must be determined experimentally.
