Stepper Driver 2.5A - PoStep25-32

Stepper Driver 2.5A - PoStep25-32

Use this small stepper driver together with NEMA17 and smaller NEMA 23 motors with load up to 2,5A. Connects directly to PoKey57CNC and PoExtBusOC16CNC via 10pin Motor Connector - or to any other STEP/DIR source such as Parallel Port Break out Board or other Motion Controllers 

0.5 to 2.5 Amps Phase Current

• Simple current setting with jumper
• Compatible with 4, 6, and 8 wire stepper motors of any voltage
• +10 VDC to +30 VDC Power Supply
• 1, 2, 4, 8, 16 and 32 Micro-steps per Step - set by DIP switch
• 0.5 to 2.5A in 0.5A increments - set by jumper
• Mixed decay mode for smoother moving of motors
• 3,3V and 5V logic compatible inputs
• 250 KHz Max Step Rate
• 0 °C To 70 °C Operating Temperature
• LED Power, Error and Enable Indicator
• Improved thermal managing
• Small Size: 50 mm X 52 mm