uStepper S 3D Stepstick L/R

uStepper S 3D Stepstick L/R

Treat your 3D Printer with Closed Loop Steppers using these simple Plug & Plat Shields.

Most 3D Printer and CNC users have experienced skipped steps. The uStepper Stepstick shield converts your machine to Closed Loop operation with these drop in parts.

By adding a uStepper onto the motor on your machine, and then replace the standard stepstick driver with a uStepper StepStick Shield, you have the building blocks for closed loop control. The final parts are to have a uStepper 3D Shield plugged into the uStepper, use a straight RJ-45 cable to connect the two. Then finnaly adjust your code following the video guide – and voila you are ready to enjoy silent closed loop control!

The uStepper Stepstick driver also comes in left or right orientations, this is needed for example if you have two rows of drivers, you will need opposite orientations in each row so there is enough room for the RJ-45 cable connection.

To setup one axis with closed loop control you will need:

• 1 x uStepper Controller
• 1 x uStepper Stepstick Shield (Either Left or Right) This item
• 1 x uStepper 3D Shield
• 1 x RJ-45 Cable