Your cart
There are no more items in your cart
Inductive Proximity Switch for use as limit switch on X and Y gantry.
Mount with two M3 screws.
Comes with 1m 3 connector wire. Color code: Brown +; Blue - and Black signal
Working Voltage: DC 6~36V; Output current: 200mA; NPN normally open; Detection distance: ca. 5 (mm) dependent on material; Shape: Box 30x18x10
Can be use alone or mounted in parallel. Use a pull down resistor between black and blue to get an output signal in the range of 5V that fits most break out boards and controller boards.
Approximate size of pull down resistor (must be confirmed with you break out board and a volt meter):
PSU voltage Single Two in Parallel
12 10k 4.7k
24 3.3k 1.5k
36 2.2k 1k
House may be Yellow or Blue
