Your cart
There are no more items in your cart
1000x1500mm Silver Xtreme Stainless OX Complete Mechanical Kit - all parts needed
Select Pulley and Coupler Bore Diameter (to fit the Motors you intend to use).
This bundle holds all items you need to make the mechanical part of the Stainless OX CNC with dual Belt Configuration.
To complete you build you need a spindle and holder, spoil board, Step Motors, Controllers, PSU, Wires and Connectors (most of this can be found in this shop) and possible more if you like e.g. limit switches.
If you use a Kress spindle you can use this holder designed for the Stainless OX
More details on the build can be found at OpenBuilds here.
The Bundle Includes:
|
Rail Bundle - Black Finish. You will have to tap the rails your self using a M5 Tap (not included) |
1 |
| Stainless OX Plate - Set of 12 Plates | 1 |
| OX Xtreme Hardware Bundle - including 28 Xtreme wheels made of polycarbonate | 1 |
| OX Screw Bundle | 1 |
| GT3 20 Teeth Pulleys - select 1/4" or 8mm Bore (to fit the Motors you intend to use) | 3 |
|
GT3 Timing Belt. Equal length of 6mm and 5mm width. Use 5mm as lower belt. For 500x750mm 2x2.5m belt will be included. |
1 |
|
Coupler(1) will have same bore as Pulleys |
1 |
| 3M Double Sided Tape | 1 |
|
Drag Chain Bundle Medium for 750x750 |
1 |
| Dual Belt End Bracket Bundle | 1 |
| Z-limit Switch Bundle | 1 |
