WhamBam Flexible Build System - 220x220mm
Are you having a difficult time getting your 3D print to stick to your printer bed?
Does your print peel up during a long print and destroy your work? Are you tired of temporary fixes such as glue sticks, hair spray, and painter’s tape?
Once you get your print to stick, do you have to pry, chisel, cut the perimeter, or put your bed in the freezer, just to get your print off the surface without gouging the surface or cutting yourself?
If any or all of the above sounds familiar - Whambam Flexible Build System is probably the best solution you can get!!
From our friends at WhamBan in the US we have this Top-end build plate system. They created a specially formulated Wham Bam PEX Polymer Build Surface which surpasses PEI in temperature resistance, performance, and material ‘stickability”. It sticks so well you would have a heck of a time getting the print off the bed without our Wham Bam Flexi Build Plate. Simply remove the Wham Bam Flexi Build Plate from the Wham Bam Flexi Magnetic Base on your 3D printer when the print is finished and flex slightly to pop your print right off! See the demo video here.
Size 220mm x 220mm / 8.7” x 8.7”
*Fits: Anet A8, Cocoon 3D Printer Touch, Wanhao Duplicator 6 and Duplicator i3 and i3 Plus, Ultimaker 1 and 2 and 3, MonoPrice Maker Select Plus and Ultimate and V2
- 1 Wham Bam Flexi Magnetic Base (high temp resistant up to 150 degrees with 3M adhesive)
- 1 Wham Bam Flexi Build Plate (spring steel)
- 1 Wham Bam PEX Build Surface Custom Formulated PEX (with high temp 3M adhesive)
- 1 Steel Wool 000 (for prepping your PEX Build Surface)