Information

New products

Specials

Filament

PLA, ABS, PETG, TPU and more

Filament There are no products in this category.

Subcategories

  • PLA - 1.75mm

    PLA or Polylactic acid or polylactide is a thermoplastic aliphatic polyester derived from renewable resources.  PLA filament provides a no-hassle 3D printing experience thanks to its reliability and good surface quality. Good tensile strength and surface quality, easy to work with at high print speeds.

    Hotend: 200-235C

    Bed: 50-60C

  • PLA - 3mm

    PLA or Polylactic acid or polylactide is a thermoplastic aliphatic polyester derived from renewable resources.  PLA filament provides a no-hassle 3D printing experience thanks to its reliability and good surface quality. Good tensile strength and surface quality, easy to work with at high print speeds.

    Hotend: 200-235C

    Bed: 50-60C

  • ABS - 1.75mm

    ABS or Acrylonitrile butadiene styrene is a common thermoplastic polymer. The most important mechanical properties of ABS are impact resistance and toughness. ABS is known for its minimal warping and consistent interlayer & bed adhesion.

    Hotend: 230-240C

    Bed: 90-100C

  • ABS - 3mm

    ABS or Acrylonitrile butadiene styrene is a common thermoplastic polymer. The most important mechanical properties of ABS are impact resistance and toughness. ABS is known for its minimal warping and consistent interlayer & bed adhesion.

    Hotend: 230-240C

    Bed: 90-100C

  • TPU - 1.75mm -...

    TPU or Thermoplastic polyurethane is any of a class of polyurethane plastics with many properties, including elasticity, transparency, and resistance to oil, grease and abrasion. 

    Hotend: 210-230C

    Bed: 20-80C

  • PETG - 1.75mm

    PETG or Polyethylene terephthalate, commonly abbreviated PET, PETE is the most common thermoplastic polymer resin of the polyester family. Easy printing. Available in solid and transparent colors.

    Hotend: 220-250C

    Bed: 70-80C

  • ASA - 1.75mm

    ASA or acrylonitrile styrene acrylate, is a thermoplastic that combines mechanical strength, UV resistance and water resistance. It also has high dimensional stability and good chemical resistance, making it ideal for prototyping, outdoor applications and the automotive industry.

  • HIPS - 1.75mm

    High impact polystyrene, or HIPS, is a material blend of polystyrene and rubber. Because it dissolves in limonene solution, it’s often used for support material when printing with ABS, eliminating the need for removal via abrasives, cutting tools, or any other such things that leave your print less-than-perfect.

  • Transparent Filaments

    Selected Transparent Filaments 

  • Filament Starter Packs

    Get startet with a range of colors