Base Mechanical Kit for V-King CoreXY 3d Printer

Base Mechanical Kit for V-King CoreXY 3d Printer

x 17


646,00 kr

In Stock


  • 250mm
  • 500mm
  • 750mm
  • 1000mm
  • 1500mm
x 24


93,00 kr

In stock


x 8


230,00 kr

In Stock


x 21


798,00 kr

In Stock



23,00 kr

In Stock


  • M3
  • M4
  • M5


20,00 kr

In Stock


  • M3
  • M4
  • M5


23,00 kr

In Stock


  • M3
  • M4
  • M5


20,00 kr

In Stock


  • M3
  • M4
  • M5
x 25


48,75 kr

In stock



23,00 kr

In Stock


  • M3
  • M4
  • M5
x 2


54,00 kr

In Stock


  • M3
  • M4
  • M5
x 50


137,50 kr

In Stock


x 4


140,00 kr

In Stock


x 6


120,00 kr

In Stock


  • M3
  • M4
  • M5


18,75 kr

In stock


  • 6mm
  • 8mm
  • 10mm
  • 12mm
  • 15mm
  • 20mm
  • 25mm
  • 30mm
  • 35mm
  • 45mm
  • M3
  • M4
  • M5


25,75 kr

In stock


  • 6mm
  • 8mm
  • 10mm
  • 12mm
  • 15mm
  • 20mm
  • 25mm
  • 30mm
  • 35mm
  • 45mm
  • M3
  • M4
  • M5
x 2


37,50 kr

In stock


  • 6mm
  • 8mm
  • 10mm
  • 12mm
  • 15mm
  • 20mm
  • 25mm
  • 30mm
  • 35mm
  • 45mm
  • M3
  • M4
  • M5


25,00 kr

In stock


  • 6mm
  • 8mm
  • 10mm
  • 12mm
  • 15mm
  • 20mm
  • 25mm
  • 30mm
  • 35mm
  • 45mm
  • M3
  • M4
  • M5
x 10


187,50 kr

In stock


  • 6mm
  • 8mm
  • 10mm
  • 12mm
  • 15mm
  • 20mm
  • 25mm
  • 30mm
  • 35mm
  • 45mm
  • M3
  • M4
  • M5


18,75 kr

In stock


  • 6mm
  • 8mm
  • 10mm
  • 12mm
  • 15mm
  • 20mm
  • 25mm
  • 30mm
  • 35mm
  • 45mm
  • M3
  • M4
  • M5


25,75 kr

In stock


  • 6mm
  • 8mm
  • 10mm
  • 12mm
  • 15mm
  • 20mm
  • 25mm
  • 30mm
  • 35mm
  • 45mm
  • M3
  • M4
  • M5
x 2


62,50 kr

In stock


  • 6mm
  • 8mm
  • 10mm
  • 12mm
  • 15mm
  • 20mm
  • 25mm
  • 30mm
  • 35mm
  • 45mm
  • M3
  • M4
  • M5


31,25 kr

In stock


  • 6mm
  • 8mm
  • 10mm
  • 12mm
  • 15mm
  • 20mm
  • 25mm
  • 30mm
  • 35mm
  • 45mm
  • M3
  • M4
  • M5
x 2


25,00 kr

In stock


  • 20mm
  • 35mm
  • M5


15,50 kr

In stock


  • 20mm
  • 35mm
  • M5
x 20


195,00 kr

In Stock


3 091,50 kr

Pack description

Base Mechanical Kit for V-King CoreXY 3d Printer

In collaboration with Roy Berntsen from Norway we are happy to supply the Base Mechanical Kit for V-King CoreXY 3d Printer

Included in the base kit you have all rails in the frame, wheels, corners and screws, nuts and washers.

Included tems in the kit:

20x20 V-Slot 500mm (16) - 12 will be tapped M5 in both ends

20x20 V-Slot 480mm (1)

Cube Corner Connector (8)

Solid V-wheel Kit (21)

Cast Corner Bracket 20x20x17 (20)  

M3 Nut (10)

M3 Washer (20)

M3x10 Cap Head Screw (10)

M3X25 Cap Head Screw (10)

M3x8 Cap Head Screw (20)

M4 Nut (2)

M4 Nylon Insert Nut (2)

M4 Washer (10)

M4x15 Cap Head Screw (2)

M4x20 Cap Head Screw (2)

M5 Mini Precision Shim 8x5x1 (25)

M5 Nut (20)

M5 Nylon Insert Lock Nut (40)

M5 Drop in T-Nut (50)

M5 T-Nut (100)

M5 Washer (150)

M5x10 Cap Head Screw (100)

M5x12 Cap Head Screw (10)

M5x20 Hex Head (20)

M5X25 Cap Head Screw (10)

M5x30 Cap Head Screw (20)

M5x35 Cap Head Screw (10)

M5x35 Hex Head (10)

M5x8 Countersink (25)

Pack content

20x20 V-Slot Linear rail. Select Grey or Black anodized finish.


Select Gray or Black Anodized finish.

Please note that Black finish is backordered until early January !

Available lengths are 250, 500, 1000, 1500mm. Full length profiles, 4600mm are available upon request, however costly to ship. Please use the contact form to get price and shipment information.

V-Slot™ is a high quality aluminum linear rail profile with an extremely smooth v groove on all 4 sides.  It's precise, easy to work with and allows you unlimited design control through it's modular nature.

V-Slot lets you ride in the rails!

v-slot-v-ride-the-rail.jpg

V-Slot is compatible with readily available, off the shelf parts!

 

v-slot-rail.jpg

 

V-Slots are an ever growing family of modular building systems

20150813-160615.jpg

How does it work?

Building with V-Slot is much like working with lumber.  You can cut it with a chop saw and the rest is as simple as turning a screwdriver to make the connections.

V-Slot's building characteristics are much like traditional T-Slot but V-Slot then goes on to add new levels of functionality through it's internal v grooves that allow for linear motion.  This brings your projects to life!    

V-Slot is a new concept in building.  Professionals, Hobbyists, and Kit Makers are sure to love it!

v-slot-connections.jpg

 

What can be made using V-Slot?

You will find that V-Slot is perfect for most projects.  Below is a list of a few ideas to get you started.  You are the creator.  Have fun with it!

  • 3D Printers
  • CNC Engravers
  • Hot Wire Machines
  • Laser Cutters
  • Camera Sliders
  • Plasma Cutters
  • Robotics
  • Furniture
  • And much more 
 
vslot-modular-machines-examples.gif
V-Slot machines go together quickly!
 
 
 

V-Slot Details

OpenBuilds V-Slot is made with 6063 T-5 Aluminum Extrusion and has a beautiful, shiny, super smooth, clear or black anodized finish.  The finish is much shinier than standard T-Slot extrusion which allows for a smoother ride for the OpenBuilds V Wheels.

Order this if you need to have your rail custom cut. Please both send us a mail and leave a note on the orders comment field on how you want your rails cut

Order one per cut to be made

The way to order custom cuts is as follows:
Within a certain size rail (e.g. black 20x40) add all the lengths you need and order the closest length you can.

Note: "Left over" cut-off will not be shipped as we do make the custom cuts from full length rails (4600mm)

Note: Custom cut can be made and shipped in normal way up-to 1800mm. If you need longer please use the contact form to get a quote on shipment.

Example

You want Black 20x40:

1pc 125mm and

2pc 235mm

1pc 1005mm

this is 1600mm in total

To place an order please order 1pc 1500mm, 1pc 250mm and 4 custom cuts.

The "scrap piece" (1750-1600) will not be shipped as the custom parts are actually cut from a full length rail of 4600mm.

Cube Corner Connector


Three way Corner. Use as V-Slot Corner Connector or wheel block 

- Milled from Solid Aluminum
- Black Anodized
- Use as 3 way Corner Connector and/or Adjustable Wheel Block
- Fits on 20mm V-Slot or T-Slot Profile Extrusion Systems 

NOTE: Mount this corner to V-Slot using M5 8mm screw and M5 T-Nuts

Solid V Wheel Kit


The OpenBuilds Solid V Wheel is a strong wheel that resists deflection due to it's solid nature.

This wheel style was produced for two reasons.
- First is for builds where heavier loads are required and less compression in the delrin is desired. Many of these wheels could be added to a gantry to allow an even distribution of the load across them. 
- Second is for improved performance of the belt and pinion system to give the belt a flat surface to ride on.

Each wheel is carefully milled for consistent high precision and tolerance.

Each Wheel Kit Includes:

    • (1) OpenBuilds Solid V Wheel
    • (2) Ball Bearings - 625 2RS
    • (2) 5mm Precision Shim
    • (1) Lock Nut with Nylon Insert

Also, be sure to grab the screws and spacers of your choice here:

  • Low Profile Screw (25mm for use with 1/8" Plate and 30mm for 1/4" Plates)
  • Aluminum Spacers 
  • Eccentric Spacers 
Note: Usually for a standard gantry plate you will need two Eccentric Spacers as well as two Aluminum Spacers 

Part Details

  • Material - Delrin (black)
  • Dimensions 23.90 OD x 16 ID  x 10.23 'thick'
  • Rockwell Hardness M80
  • Compressive Strengh 63Mpa

Nut available in M3, M4 or M5


Select size M3, M4 or M5.

Sold in packs of 25

Flat washer for M3 or M5.

Carbon steel.

OD M3: 7mm

OD M4: 9mm

OD M5: 10mm

Select size.

Mini V Wheel Precision Shim


Mini V Wheel Precision Shims offer precise spacing for your projects.

"These are the Precision Shims used in the Mini V Wheel Kits and can also be used for spacing on many other applications."

Product Details

  • Qty. 1
  • M5
  • 8mm OD
  • 5mm ID
  • 1mm Thick + 0.076/-0
  • Stainless Steel
  • Color: Silver

Nylon Insert Hex Locknut


Select size M3 or M5. The M5 locknut is included with each of our Wheel Kits.

Sold in packs of 25

Drop In Tee Nut


These are post insertion Tee Nuts that can be added anywhere along the slot of V-Slot or compatible extrusions.

They are nice to have on hand because they do not need to be placed in from the ends of the extrusion.  They can be easily placed in later in the building process.

Drop in Tee Nuts are installed by placing them in the V-Slot and then once the screw is engaged, it will turn them and engage them into the bottom side of the V Track.  Once tightened the teeth grab into the anodized coating, to ensure a no-slip connection. 

  • Fits M5 Screw
  • 6 x 10.3 x 4.4mm

Tee Nuts (25 Pack)


Tee nuts are essential for assembly any slot based aluminum profile systems. These Tee nuts fit perfectly into the V-Slot profile for easy assembly.

Shape can vary slightly batch to batch between rectangular or rectangular with angled corners.

  • Packs of 25
  • Low Carbon Steel
  • M5 Thread Size 
  • 10x15mm

Cap Head Screw  (10 Pack)


Cap Head Screw in different sizes available. Sold in 10 Pack

Available sizes:

M3x 8, 10, 12; 15; 25, 35; 45

M4x 6; 12, 20

M5x 10, 12, 25, 30, 35

Some use examples

M3x30mm

These screws can be used in combination with the V-Slot Actuator End Mount.

They fit the M3 threads of the Nema 17 stepper motors so they are useful in many projects.

M3x45mm

These screws can be used in combination with the 1.5" Spacers to mount Nema 17 stepper motors in a stand off position.

M4x6mm

Assembly Zero/Corner Finding Tool

M4x12

Mount Drag Chains to Gantry Plates

Black Hex Head Screw  (10 Pack)


Black Hex Head Screw  (10 Pack).

Available sizes:

M5x 20, 35

Black Countersunk Hex Socket Head Screw M5x8


Black Countersunk Hex Socket Head Screw M5x8

Pack of 10

Cast Corner Bracket - Large


These are large 20mm x 28mm x 28mm (with a 4mm wide T-slot tab) and is used to connect (2) V-Slot or 20 Series T-slot aluminum extrusions together for a 90 degree connection.

NOTE:  Since the cast comer brackets have stand off teeth (for locking in the slot) in one direction you use 10mm Low Profile Screws and for the flush mount direction you use the 8mm low profile screws along with the M5 Tee Nuts