NPN NO Inductive Proximity Switch

Inductive Proximity Switch for use as limit switch on X and Y gantry.

Ø12mm mounting that fit the holes in Stainless OX Gantry plates.

Comes with 1m 3 connector wire. Color code: Brown +; Blue - and Black signal

Working Voltage: DC 6~36V; Output current: 300mA; NPN normally open; Detection distance: ca. 4 (mm) dependent on material; Shape: Cylinder diameter of 12 mm, length 63mm.

Can be use alone or mounted in parallel. Use a pull down resistor between black and blue to get an output signal in the range of 5V that fits most break out boards and controller boards.

Approximate size of pull down resistor (must be confirmed with you break out board and a volt meter):

PSU voltage   Single  Two in Parallel

12                 10k      4.7k

24                 3.3k     1.5k

36                 2.2k     1k

 Cap may be Yellow or Blue